Products
| Sr. No. | Item | Description | Photograph |
| PULLEY CRANK SHAFT | |||
| 1 | Pulley Crankshaft | OD : 192mm Bore Tolerance : H7 Material : CI G25 |
 |
| 2 | Pulley Crankshaft | OD : 192mm Ø10.5 – 5Holes on 28PCD Bore Tolerance : H7 Material : CI G25 |
 |
| 3 | Pulley Crankshaft | ‘B’ Groove Material : CI G25 Balanced |
 |
| 4 | Pulley Assembly Engine Crank | Case Hardened Steel Bush – 50 HRC With plung grinding – Tol. H11 OD : 169mm Bore Tolerance : H7 Material : CI G25 |
 |
| 5 | Pulley Crank 123mm diameter | OD : 149mm Ø11– 3Holes on 26PCD Groove Angle : 36° Bore Tolerance : H7 Material : CI G25 |
 |
| 6 | Pulley Assembly crankshaft B-type | OD : 192mm Bore Tolerance : H7 Material : CI G25 |
 |
| 7 | REMENICE Pulley | OD : 189 mm Bore Tolerance : H7 Taper Lock Bore 1:10 Material : CI G25 Application : ZETOR ENGINE |
 |
| 8 | Pulley Crankshaft | Material : CI G25 With Induction Hardening |
 |
| 9 | Pulley Crankshaft | Material : CI G25 |  |
| 10 | Crankshaft Pulley | With Induction Hardening- 45HRC Application : SIMPSON ENGINE |
 |
| 11 | Pulley Crankshaft (4WD) | Material : CI G25 Double Groove |
 |
| 12 | Pulley Crankshaft (4WD) | Material : CI G25 Double Groove |
 |
| 13 | Pulley C Shaft (AC)
Sl0111402A |
Material : CI G25 |  |
| 14 | Pulley Crank Shaft LP0111401B |
Material : CI G25 |  |
| TRACTION SHEAVE | |||
| 1 | Traction Sheave | LIFT Pulley for steel rope. Material SG IRON 700/2 4 – Groove Dia 320mm Application : Elevator industry |
 |
| 2 | Traction Sheave | Material SG IRON 800/2 8- Groove Dia 250mm Application : Elevator industry |
 |
| 1 | Engine Belt Pulley | Material : FG220 Application : HARVESTER COMBINE |
 |
| 2 | Variator Pulley Assembly | Dia 386mm Material : FG220 Application : HARVESTER COMBINE |
 |
| 3 | Chamber Pulley | Material : FG220 Application : HARVESTER COMBINE |
 |
| 1 | Taper Bore Lock Pulley | Material : CI G25 Bore Taper 1:10 |
 |
| 2 | Idler Alternator Pulley | Material : CI G25 |  |
| 1 | Manifold Exhaust | Total Length : 315mm Material : CI G20 3 Port |
 |
| 2 | Exhaust Manifold – 4 Cylinder | Material : CI G20 4 Port |
 |
| 3 | Elbow Exhaust | Material : CI G20 |  |
| 4 | Manifold Exhaust | Material : CI G20 2 Port |
 |
| 5 | Exhaust Manifold | Application : SIMPSON ENGINE |  |
| 1 | Retainer Transmission Output Shaft Bearing | Bore CD : 0.050mm Face Flatness : 0.050mm Material : CI G20 |
 |
| 2 | Plate Clutch Release Bearing hub Support | Transmission Material : SG Iron 500/7 |
 |
| 3 | Brake Plate | Material : FG220 Application : HARVESTER COMBINE |
 |
| 4 | Thermostat Housing | Application : SIMPSON ENGINE |  |
| 5 | Elbow | Material : CI G20 Application : SIMPSON ENGINE |
 |
| 6 | Thermostat Housing Cover | Material : CI G20 Application : SIMPSON ENGINE |
 |
| 7 | Engine Adaptor | Material : CI G20 Application : SIMPSON ENGINE |
 |
